USB/P606 problems

Felix Tha Kat · Post by **Felix Tha Kat** » Sat Jan 17, 2009 8:19 pm

My comp.. wants me to install a driver for the hardware after ive installed p606/driver patch i hit cancel but then theres that pop noise like its unplugging the usb connection to the sp-606 i try to open p606 then tells me no connection found to sp-606 then closes HELP PLZ!?!?!?!?!?

PHeMoX · Post by **PHeMoX** » Sat Jan 17, 2009 9:24 pm

You shouldn't cancel that the first time and it will force you to reboot the PC after which things should work fine.

If not, then you're having the same issue I had. Apparently Windows XP can't handle more than 10 USB device profiles in it's registry at once, so you might need to delete profiles you're not using. (Mind you simply plugging a USB device into a different USB port as the one you've used to install, might spawn a new USB profile filling up the registry with crap. Eventually this might be causing problems now.)

Search the 606 forum for the solution or check back here if you can't find it, it's relatively easy to manually remove USB profiles from the Windows registry and fixing your issue!

Felix Tha Kat · Post by **Felix Tha Kat** » Sat Jan 17, 2009 9:30 pm

Well when i installed p606 it it never asked me if i wanted to reboot the comp now or later and how do u delete the usb profiles????

PHeMoX · Post by **PHeMoX** » Sat Jan 17, 2009 9:36 pm

Nah, it should not reboot when installing P606, it should reboot when installing the SP-606 specific USB drivers. Windows needs them first and they are on your SP-606 CDs as well.

If installing those still doesn't make things work, you'll have the registry issue.

Take a look at this thread:
viewtopic.php?t=2125

Around half-way through Enossified posted what you will want to know about USB profiles.

Or if you're lazy like I am, here's the link directly to the article:
http://createdigitalmusic.com/2006/02/2 ... to-fix-it/

Cheers

Felix Tha Kat · Post by **Felix Tha Kat** » Sat Jan 17, 2009 9:59 pm

Word thanks alot Phem ill try this when i get home and i hope i dont fuck my computer up lol well i bought my sp off craigs list so it didnt come with any cds do i need them???? and how do i get em

axiom gates · Post by **axiom gates** » Sat Jan 17, 2009 10:56 pm

http://www.rolandus.com/products/produc ... jectId=573

thats a link to all the drivers for the 606 homie. just click the download tab on that page

Felix Tha Kat · Post by **Felix Tha Kat** » Sat Jan 17, 2009 11:49 pm

Thanks Axiom

Felix Tha Kat · Post by **Felix Tha Kat** » Sun Jan 18, 2009 9:11 pm

Well i got the driver to work but p606 still doesnt work i can get the sp in ableton live to record audio but cant get MIDI to work ex.. using the sp-as a MIDI controller any more advice?????

axiom gates · Post by **axiom gates** » Mon Jan 19, 2009 4:24 am

i'm not familiar with p606 software so i can't help u there but as for the live issues u should be able too change your midi in n midi out settings through the preferences section of live. if that doesn't help i'd message jaylost on here, i think he works with live and a sp

PHeMoX · Post by **PHeMoX** » Mon Jan 19, 2009 9:02 am

Felix Tha Kat wrote:Well i got the driver to work but p606 still doesnt work i can get the sp in ableton live to record audio but cant get MIDI to work ex.. using the sp-as a MIDI controller any more advice?????

This sounds a lot like the driver issue isn't solved quite yet. I'd look into the USB profile issue as written in the article I linked to.

P606 should always work and it's probably the best program to test if your SP is installed properly and being recognized, as it simply won't start as long as something's wrong.

If the midi driver doesn't work properly, you're not going to be able to use the SP in Live the way you want either. So unless reinstalling P606 suddenly makes it work, I'm thinking you're having the same USB issue I had.

Felix Tha Kat · Post by **Felix Tha Kat** » Mon Jan 19, 2009 7:32 pm

well i did try to manualy delete one of the usb reg.. but none of them were duplicates as shown in that link and im not sure i have backup drivers to delete them all dont wanna risk it. and in the control panel there is a roland sp-606 icon so it is acknowledging that its there.... but i might jus be a lil comp illerate sorry lol any more info would be great

korakios · Post by **korakios** » Mon Jan 19, 2009 10:11 pm

try the unistall utility in roland's site and re-install the driver...
...also check at the sp606 menu that vender driver is on...

Felix Tha Kat · Post by **Felix Tha Kat** » Mon Jan 19, 2009 10:14 pm

^ Word ill try that to. is there a certain way i should go about installing things????

PHeMoX · Post by **PHeMoX** » Mon Jan 19, 2009 11:04 pm

No, not really, I had and fixed the problem on two machines. Both times it turned out to be a matter of removing some of those USB registers.

You know, there's a risk by suggesting this, but I would try to remove some more USB registers and reinstall again.

How many USB registers did you count there? I had like 14 in total or so, so I had to remove about 5 for it to work.

I would suggest to find someone that has a little bit more knowledge of all this, but Windows should be able to install most USB devices when you connect them again. I'd pay attention not to remove USB profiles you don't know, but I would remove all of the SP-606 related profiles... after all, Windows thinks it's all fine and dandy installed, but it's not.

Good luck and hopefully you will get this solved. Again, the only way to get your SP working in your DAW with midi-over-usb (or midi to midi) and so on, is getting the driver to function properly.

Felix Tha Kat · Post by **Felix Tha Kat** » Tue Jan 20, 2009 1:53 am

^Thank you everyone for the help. ya know i didnt count the reg files ill do that tonight Stay ^ much luv and respect Felix Tha Kat D.H.E