Pattern length function disabled -SP404
Moderator: TGN
-
Illusional
- New member
- Posts: 2
- Joined: Sat Apr 08, 2017 1:18 am
Pattern length function disabled -SP404
My pattern length in pattern record mode is stuck on 2 bars. When I press the button and use ctrl 3 it stays stuck on 2 bars... any thoughts? My ctrl 3 works fine with all other functions.
-
Illusional
- New member
- Posts: 2
- Joined: Sat Apr 08, 2017 1:18 am
Re: Pattern length function disabled -SP404
welp looks like i will continue making 2 bar loops....
-
seph_pouch
- New member
- Posts: 3
- Joined: Wed May 31, 2017 1:05 am
Re: Pattern length function disabled -SP404
I am in the same boat and am also very much wanting a solution!!!!
-
scopebeats
- Member
- Posts: 202
- Joined: Fri Jun 05, 2015 12:03 pm
- Location: Switzerland
Re: Pattern length function disabled -SP404
http://sp-forums.com/viewtopic.php?f=3&t=6968
Quote from wax inspector in the thread i linked:
you can extend a pattern:
- go into pattern rec mode and before you start the recording press the length button and use ctrl 3 to add some bars BUT these will be blank...
no chance to shorten a pattern though!
Quote from wax inspector in the thread i linked:
you can extend a pattern:
- go into pattern rec mode and before you start the recording press the length button and use ctrl 3 to add some bars BUT these will be blank...
no chance to shorten a pattern though!