NEW TO THE FORUM....

Talk the talk.

Moderator: TGN

Post Reply
¥UME
New member
Posts: 1
Joined: Wed Jun 21, 2017 2:59 pm

NEW TO THE FORUM....

Post by ¥UME »

let me know how yall are doing... names YUME...

https://soundcloud.com/yumebeats/high-five-unitswav

i am trying to get some feedback and also some tips from anyone who sees this....

need to learn how to side chain aka using a ghost kick etc...and also having a hard ttime trying to make the perfect drum loop without like some kind of sutter etc...oh and maybe trying to figure out how to mark and delete the END of my sample not just the front of it
User avatar
yungworldconqueror
Member
Posts: 25
Joined: Tue Dec 27, 2016 5:35 pm
Location: philly
Contact:

Re: NEW TO THE FORUM....

Post by yungworldconqueror »

side-chaining techniques on the sp vary. the one i like to use is mfx 12 compression on my kick and sample. make sure your sample volume is lower than your kick sample (i normally turn my sample down to about 80-90 and leave my kick at 127). turn knob one all the way right, knob two all the way left, knob three all the way right. play around with the parameters from there and see what you like most. there's a good youtube series on the SP from chops magazine that shows how to make a perfect loop, however i still struggle from time to time

https://www.youtube.com/watch?v=RpseQ2Qxp1M
User avatar
SOUL CHOPPA
Member
Posts: 228
Joined: Mon Apr 17, 2017 9:31 am
Contact:

Re: NEW TO THE FORUM....

Post by SOUL CHOPPA »

To mark and delete:

1. press pad with sample
2.use to the mark function to narrow it down to the area you want to use
3.fine tune it by pressing the START/END/LEVEL and using the middle two knobs to adjust the start and end points.(repeat this process until you get it where you want
4. to permanently delete the excess sample at the front and end, press the pad with sample
5. press DEL
6. press MARK
7.TrC or something should pop up on the screen
8.press DEL again , wallah


try finding a manual online if you don't have one
Post Reply