Flex cable for pcb board

[Shotsdupre]

✌ everyone

My homie asked me to fix his knobs. He got impatient in the process and tried himself and melted a piece of the ribbon cable to the pcb board. Now the numbered pads and pad banks also delete and a few other pads are unresponsive. The effects all work and when selecting mfx it still lights up the pads and will let you select but when going back to playing a pad nothing happens.

Hoping I can replace the cable but haven't had any luck finding
E66085 AWM 20624 80C 60V VW-1 BANDO - SH -F-

22 pin


Would anyone on here happen to know if BANDO SH F at the end has to be on the replacement or if it needs to be the exact same?

If anyone has a ribbon or set of them I could buy that would be greatly appreciated or if anyone has a broken SX that would be dope

Thanks

-Shots

[greenshrt]

I would try DMing CHOP LIFTER on twitter. He repairs a LOT of sp's and would be able to help point you in the right direction.

https://twitter.com/CHOP_LIFTER

[Shotsdupre]

I would try DMing CHOP LIFTER on twitter. He repairs a LOT of sp's and would be able to help point you in the right direction.

https://twitter.com/CHOP_LIFTER

Thanks man! Will do