Just got a mixer a Roland Numark DM 1050 have no idea how to hook it up to my equipment
I got two turntables,SP404 & A pair of Rokit 5 speakers
Any help would be greatly appreciated
Mixer Set Up?
Moderator: TGN
-
LoopmantrA
- Member
- Posts: 483
- Joined: Wed Feb 07, 2018 11:14 pm
Re: Mixer Set Up?
GREEN - turntable A (phono input)
RED - turntable B (phono input) / SP 404 A (line input)
PURPLE - master out to Rokits, record out to your recording device
That's one way, depends on what you want really. This way you have to switch manually between the SP and turntable, you could also use one of the turntables to go directly into the SP via external source (for sampling) - but you'll still need an amp.
You could also hook up both turntables into Numark, then use the master output (purple) to send signal to the SP 404 A, and then use the SPs' output to send everything to Rokits.
Like I said, depending on what you aim for.
Peace!
RED - turntable B (phono input) / SP 404 A (line input)
PURPLE - master out to Rokits, record out to your recording device
That's one way, depends on what you want really. This way you have to switch manually between the SP and turntable, you could also use one of the turntables to go directly into the SP via external source (for sampling) - but you'll still need an amp.
You could also hook up both turntables into Numark, then use the master output (purple) to send signal to the SP 404 A, and then use the SPs' output to send everything to Rokits.
Like I said, depending on what you aim for.
Peace!
- Attachments
-
- PSX_20190923_215014.jpg (140.43 KiB) Viewed 30238 times
-
VelvetV12Shame
- Member
- Posts: 11
- Joined: Fri Aug 07, 2020 4:37 pm
Re: Mixer Set Up?
hey do you think you can help me setup a behringer umm 404 hd to use 202 and 404 simultaneously, still haven't got studio monitors but I found a pair for $89 on amazon so maybe. But my main concern is setting up 404 into Ableton with audio interface I have 2 dual ts to rca cables for interface and 404 am I missing anything?