INT MIC NOT WORKING on my 40s4sx

JOHNSONDONTSURF · Post by **JOHNSONDONTSURF** » Mon Jul 29, 2013 9:31 pm

What's up everyone!

I'm having trouble with my internal mic, when I try to record a clap it doesn't pick up or record any sound. I know the problem has to be inside the 404 but don't have the courage to open it. I guess I'm just hoping I'm WRONG AND SOMEONE CAN HELP ME OUT AND I DON'T HAVE TO OPEN THE 404sx!!

Om_Audio · Post by **Om_Audio** » Mon Jul 29, 2013 9:48 pm

Did it ever work? The mic is soldered right to the pcb there is not much that can go wrong with it aside from water damage or bad solder joint (which I think is very unlikely)
O

hseiken · Post by **hseiken** » Mon Jul 29, 2013 10:24 pm

Just a stupid question, you hit EXT *and* MIC buttons so they're both on?

JOHNSONDONTSURF · Post by **JOHNSONDONTSURF** » Tue Jul 30, 2013 2:00 am

Yes, ext and mic buttons are lit and on. It must be the soldering because the other mic works and when I have a mic plugged in.

I have a homie that helped me re-solder my amp input once. I think I'll have him help me out.

Just hope nothing goes wrong!

JOHNSONDONTSURF · Post by **JOHNSONDONTSURF** » Tue Jul 30, 2013 2:00 am

Yes, ext and mic buttons are lit and on. It must be the soldering because the other mic works and when I have a mic plugged in.

I have a homie that helped me re-solder my amp input once. I think I'll have him help me out.

Just hope nothing goes wrong!

Om_Audio · Post by **Om_Audio** » Tue Jul 30, 2013 4:20 am

You might want to have a new capsule on hand and just replace it- the part can't be more than a few bucks.
$0.25 in fact- I am pretty certain this is exactly what is in there:
http://www.taydaelectronics.com/condens ... -1-5v.html

I see you are in SoCal- I am in Los Angeles area if you get stuck and need help!

Om_Audio · Post by **Om_Audio** » Wed Jul 31, 2013 9:18 am

Check out the SP-404SX microphone mod I did tonight- if you like what it does you could easily implement it when you are having yours looked at.

http://sp-forums.com/viewtopic.php?f=3& ... 72#p125972

Cheers,
C

JZTR · Post by **JZTR** » Wed Jul 31, 2013 1:22 pm

Did you make sure the mic is turned up? Next to the mic on the very front of the unit there's a little dial which affects the gain, could be it's turned all the way down.

Om_Audio · Post by **Om_Audio** » Wed Jul 31, 2013 8:13 pm

killdevilhills wrote:Did you make sure the mic is turned up? Next to the mic on the very front of the unit there's a little dial which affects the gain, could be it's turned all the way down.

Wow, I thought that was just for an external mic! Learn something new every day! Thanks
C

JOHNSONDONTSURF · Post by **JOHNSONDONTSURF** » Thu Aug 01, 2013 12:23 am

Thanks guys!

Yes. the small mic knob is turned all the way up. Still haven't opened the 404 yet. Om Audio I just might hit you up in the future. Thanks

SP-FORUMS

INT MIC NOT WORKING on my 40s4sx

INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx

Re: INT MIC NOT WORKING on my 40s4sx