Best way to convert 404 to 404SX

[Om_Audio]

How do we do this?
cheers-
Om

[formal]

Post an Ad on craigslist for $150 for your OG 404. Save up $100.

Spend $150 + the $100 you saved, now buy a 404sx on craigslist.

There's no way to convert your old 404 to a new one.

[Om_Audio]

sorry that was silly- of course I am talking about the files not the hardware. I bought an SX yesterday.
Thanks
Om

[formal]

You need the OG 404 to convert files. Basically you just export all the pads to WAV files. Then put the CF card in the computer and drag n drop.

1.
Make sure that [PATTERN SELECT] is not lighted.
If it’s lit, press [PATTERN SELECT] to switch it off.
2.
Hold down [CANCEL] and press [RESAMPLE].
“FiL” (File I/E) appears in the display, and [REC] and
[RESAMPLE] begin blinking.
3.
Press [RESAMPLE]. “EXP” (File Export) appears in the
display, [REC] lights, and [RESAMPLE] goes out.
4.
Select the export-source sample bank.
Press one of the BANK [A]–[F/J] buttons. The button you
pressed lights, and that bank (A–F) is selected. If you press a
BANK [C/G]–[F/J] button once again, the button starts
blinking, and a G–J bank is selected.
Pads to which a sample is assigned begin blinking.
5.
Select the export-source pad.
The pad you pressed lights, and the remaining pads stop
blinking. Also, [REC] begins blinking.
You can select multiple pads if they are within the same sample
bank. Press any pad that was blinking at step
4
to select it.
6.
Press [REC] so it’s lit.
During the export operation, the dot in the display will blink.
When the export is complete, the blinking will cease.

[Om_Audio]

Thank you!!
worked like a charm-
Om