FEO HELP

Moderator: TGN

Post Reply
moloch
New member
Posts: 3
Joined: Thu Oct 07, 2010 11:36 am

FEO HELP

Post by moloch »

:|
Last edited by moloch on Wed Nov 17, 2010 6:17 pm, edited 1 time in total.
User avatar
LoneStar
Member
Posts: 339
Joined: Sun Dec 20, 2009 9:54 am
Location: NRW

Re: FEO HELP

Post by LoneStar »

Ut oh, you ruined it.

http://ftp.roland.co.jp/support/en/down ... dme105.pdf

"Do not power-off the SP-404 while the update is in progress. If the power should accidentally fail during the update, the SP-404 system will be damaged, and the unit may become inoperable."

"7. Power-on the SP-404, and the update will begin automatically. (During the update, the pads will light consecutively, and the display will count-down the processing time.)
8. When the display indication reaches "000" the update has been completed. (The processing time will be approximately 30 seconds.)
Power-off the SP-404 and remove the memory card."

That countdown was completely normal. You should have read the update instructions; because you didn't, you have ruined your machine I'm afraid.
2x Vestax PDX 2000 + Denon DN-S1000 + Numark 5000FX
User avatar
admbmb
Member
Posts: 480
Joined: Fri Sep 03, 2010 6:06 pm
Contact:

Re: FEO HELP

Post by admbmb »

LOL...why did you shut it down? What, did you think it was going to blow up or something? (- good thing you didn't snip the blue wire)

General rule of thumb is while it is "thinking" in any situation, NEVER shut it off.

I doubt the machine is destroyed, but it may require shipping it to Roland to get it fixed.
User avatar
DREWDANK
Member
Posts: 1652
Joined: Sat Oct 20, 2007 5:35 am
Location: sactown

Re: FEO HELP

Post by DREWDANK »

moloch wrote:I borrowed an SP404 and was putting samples onto a compact flash along with the firmware upgrade (DCOAPL.BIN and DCOAPL2.BIN) and fuck me but it started counting down 100. I freaked and powered it off. When I switched it on again FEO came up on the display and the external mike button was lit. I've been trawling the net to see if anyone knew anything cause Roland certainly don't seem to. What the fuck do I do now???


gah! whoever let you borrow that will kill ya. sorry buddy just keep messing with it.
MadTrucker
Member
Posts: 45
Joined: Wed Jan 20, 2010 3:57 am

Re: FEO HELP

Post by MadTrucker »

I'm sorry to laugh, but this is so much of a "textbook scenario" that it feels like an inside joke among SP nerds. I just keep picturing the countdown and a dude scrambling like "wait wait wait...no" like his ass was about to have a McGruber moment...I know it's sad when an SP dies, but sometimes it's kind of funny too.

I killed and resurected my 202 twice, so I beleive they can be fixed, but yeah there is certainly a chance you may have to replace a small part in the circuitry somewhere.

My instict would tell me to attempt to restore the factory settings, and reformat the card if the card is not blown (it is probabaly shot).
User avatar
DREWDANK
Member
Posts: 1652
Joined: Sat Oct 20, 2007 5:35 am
Location: sactown

Re: FEO HELP

Post by DREWDANK »

MadTrucker wrote:I'm sorry to laugh, but this is so much of a "textbook scenario" that it feels like an inside joke among SP nerds. I just keep picturing the countdown and a dude scrambling like "wait wait wait...no" like his ass was about to have a McGruber moment...I know it's sad when an SP dies, but sometimes it's kind of funny too.

I killed and resurected my 202 twice, so I beleive they can be fixed, but yeah there is certainly a chance you may have to replace a small part in the circuitry somewhere.

My instict would tell me to attempt to restore the factory settings, and reformat the card if the card is not blown (it is probabaly shot).

lol pull a drewdank hand it back broken deny deny deny. also delete this thread cuz when he gets it back most likely hell come here.
moloch
New member
Posts: 3
Joined: Thu Oct 07, 2010 11:36 am

Re: FEO HELP

Post by moloch »

:|
Last edited by moloch on Wed Nov 17, 2010 6:18 pm, edited 1 time in total.
User avatar
admbmb
Member
Posts: 480
Joined: Fri Sep 03, 2010 6:06 pm
Contact:

Re: FEO HELP

Post by admbmb »

That sucks, man. Jokes aside, I was rooting for you. You'd think that there would be some way to resurrect it considering no hardware was damaged.
User avatar
Euclid Ov Oåklånd
303 Award Winner '09
Posts: 4588
Joined: Sun Jul 01, 2007 12:01 am
Location: Narnia

Re: FEO HELP

Post by Euclid Ov Oåklånd »

Reading is fundamental, not just a PSA on Saturday morning cartoons. If all the guy is going to do is initialize the memory, you can try that your self. Just download and read the .pdf manual from Roland's site, it'll tell you how to initialize the machine and re-install the OS. Don't load samples with the OS update/install either.....might confuse it as machines are DUMB. When you do it correctly you'll see the same image that's in my avatar thing on the side of this post flashing, then you hit the REC button and pray for mercy.
moloch
New member
Posts: 3
Joined: Thu Oct 07, 2010 11:36 am

Re: FEO HELP

Post by moloch »

:|
Last edited by moloch on Wed Nov 17, 2010 6:19 pm, edited 1 time in total.
User avatar
Euclid Ov Oåklånd
303 Award Winner '09
Posts: 4588
Joined: Sun Jul 01, 2007 12:01 am
Location: Narnia

Re: FEO HELP

Post by Euclid Ov Oåklånd »

That's terrible buddy, that's all I have to suggest. I'm sure Roland could fix it, but the amount of time in shipping back and forth, coupled with the fact that a repair can cost more than a used 404 on craigslist or ebay means you might just have to look for a good deal and buy you're friend another 404.
Post Reply