wierd problem

DarkWing · Post by **DarkWing** » Thu Oct 11, 2007 7:54 pm

My Sp-404 is acting wierd...
sometimes when I record a sample onto a pad the sound will pan from side to side (without the pan function selected) very strange...

balazs · Post by **balazs** » Thu Oct 11, 2007 8:12 pm

are u sure effect #6 isnt assigned to the pad or #6 effect wasnt on while you sampled it into the machine?

the only other thing i could think of is bad cables

DarkWing · Post by **DarkWing** » Thu Oct 11, 2007 8:16 pm

I'm Absolutely sure there aren't any effects assigned... Tried different cables as well. I doubt it's the cables... sometimes it's good.

balazs · Post by **balazs** » Thu Oct 11, 2007 8:18 pm

are u sure the effect wasnt assigned to the ext source while you sampled it into the machine?

DarkWing · Post by **DarkWing** » Thu Oct 11, 2007 8:23 pm

Yup, the same happens if I resample a sample to another pad...

balazs · Post by **balazs** » Thu Oct 11, 2007 8:38 pm

does it pan smoothly as if you did assign the pan effect to it or does it sound all fucked up?

DarkWing · Post by **DarkWing** » Thu Oct 11, 2007 8:51 pm

it sounds like the effect... but as I said, sometimes it samples allright, and sometimes this happens... (and I haven't even used the effect since it started happening)

sampie · Post by **sampie** » Thu Oct 11, 2007 9:06 pm

you know sometimes when i sample and i have "stereo" clearly selected my sample comes out panned to one side. very strange. It doesnt happen that offten but happens nonetheless. wierd!

Dj Frantic · Post by **Dj Frantic** » Thu Oct 11, 2007 9:17 pm

sounds like a bad RCA jack.

balazs · Post by **balazs** » Thu Oct 11, 2007 9:22 pm

I dont know anything about os shit but check frantics suggestion in this thread viewtopic.php?p=5850&highlight=#5850 i dont know if that could be a solution to your problem. See what frantic says.

Dj Frantic · Post by **Dj Frantic** » Fri Oct 12, 2007 12:22 am

you can try it. This seems like a hardware issue but it couldnt hurt to try.