sp 303 and mpc 1000 setup?

Moderator: TGN

Post Reply
mykro
Member
Posts: 23
Joined: Mon Jan 11, 2010 1:15 am

sp 303 and mpc 1000 setup?

Post by mykro »

I'm new to the forums..! :)



I was just wondering how would i set the sp 303 up with the mpc 1000 so i can use the 303's effects with it..
I got an great deal..brought it for 100$ today from a place that was closing down and getting rid of everything
I must have luck because i brought my mpc 1000 for an 100$ also with the 128 ram just needed the pad upgrade having a lotta luck these days
User avatar
ellaguru
Member
Posts: 7753
Joined: Sun Jan 04, 2009 9:43 pm
Location: France-Italy

Re: sp 303 and mpc 1000 setup?

Post by ellaguru »

hi
the 303+the1000 is a cool couple.
you can use them as fx(303)+sequencer(1000).
or to fx the 1000 outs.
plus: you have the lofi sound on the 303 that you don't have on the 1000 o you can sample that on the 1000.
other:
drive the 303 with the 1000 via midi.
cheers
mykro
Member
Posts: 23
Joined: Mon Jan 11, 2010 1:15 am

Re: sp 303 and mpc 1000 setup?

Post by mykro »

thank you so much....so just use the mpc 1000 out into the 303 in?
User avatar
ellaguru
Member
Posts: 7753
Joined: Sun Jan 04, 2009 9:43 pm
Location: France-Italy

Re: sp 303 and mpc 1000 setup?

Post by ellaguru »

or
you can resample what you've done into the 303 to the 1000 cause you don't have that lofi flavour on the 1000.
or
you can use the 303 as a drum module controlled by the 1000 via midi: the 303 compressor fx applied on drums is a killer!
mykro
Member
Posts: 23
Joined: Mon Jan 11, 2010 1:15 am

Re: sp 303 and mpc 1000 setup?

Post by mykro »

ellaguru wrote:or
you can resample what you've done into the 303 to the 1000 cause you don't have that lofi flavour on the 1000.
or
you can use the 303 as a drum module controlled by the 1000 via midi: the 303 compressor fx applied on drums is a killer!



Do i need an smart card to use the efx?
User avatar
ellaguru
Member
Posts: 7753
Joined: Sun Jan 04, 2009 9:43 pm
Location: France-Italy

Re: sp 303 and mpc 1000 setup?

Post by ellaguru »

no
you can do without it
mykro
Member
Posts: 23
Joined: Mon Jan 11, 2010 1:15 am

Re: sp 303 and mpc 1000 setup?

Post by mykro »

ellaguru wrote:no
you can do without it



so i have the sp effect thing down how do I apply it to the mpc..Once again i have the my 1/4" Male to Dual RCA coming out out my mpc 3/4 outs into my sp 303 in...NOW Crossings if can help figure this thing out I will be good with this subject..oh and i read manuel and try all night to figure this **** out ..

thanks
vvasa
Member
Posts: 16
Joined: Thu Feb 25, 2010 11:13 am

Re: sp 303 and mpc 1000 setup?

Post by vvasa »

HELO, im not quite shure what you want. and i dont own a mpc. but if you send your sound source throu the 303 before you send it in to your mpc, you can sample with effects.
(SOUNDSOURCE -> 303RCA-IN/MIC -> EFX -> 303RCA-OUT/PHONES -> MPC)
You might want to put the 303 later in the chain. .. but you have probably found out how you like it by now. right? :cry:
.sp303!vvasa.
Post Reply