Recording 2 different Signals on Track A (1+2)

[TGN]

Hey Fam,
quick question:
Is it possible to record 2 different Mono-Signals on a Track (for example Track A (1+2)) and resample from that track with hard pan (left and right) to mono on 2 pads? So i have recorded 2 sources simultanously , but have the samples on differen pads afterwards?

[TGN]

Yes, it is! Just tried it myself. You can record two different mono signals at the same time. on a stereo track. Then you can either

a.) copy this phrase from the sequencer to your clipboard and then to a pad. Throw the Effect A 81: "Center Canceller" on it. Set the parameter "Center Canceler Position" to hard right and play with "lo lim" and "hi lim" until you just hear what was recorded on the right channel now in stereo. Resample.
Do this procedure a second time, but now set the parameter "Center Canceler Position" to hard left. Voila, two different Samples with your different Mono-Signals.

b.) or mixdown your Track containing your recorded phrase with the "Center Canceler" enabled. Route the efx to "Track A preEQ" when your recorded phrase is on Track A. Set the parameter "Center Canceler Position" to hard right and play with "lo lim" and "hi lim" until you just hear what was recorded on the right channel now in stereo. Then choose an empty track and mixdown Track A to it. To get the other mono-signal, set the "Center Canceler Position" to hard left, set the "lo lim" and "hi lim" right and mixdown your Track A to another empty track. Tadaaa, two different tracks, with your 2 different recorded signals.

Great for recording jams with another musician, obviously.

[Danswift]

I never use the Multi Track recorder on the 808s but this is cool to know.

[K.loor]

Which machine it concerns?

[TGN]

Which machine it concerns?

SP-808 (EX)