Hey,
I am trying to use my sp404sx as an external effect with ableton. I have the outs of my sp going to my interface and the ins from my interface going into my outs. When I hit the EXt Source pad, I get this very high pitched noise.
Any Help?
Thanks
EXT Source High Pitch Whine Noise
Moderator: TGN
-
blisnvrwas
- New member
- Posts: 7
- Joined: Wed Jul 15, 2015 11:59 am
- Location: Philadelphia, PA
Re: EXT Source High Pitch Whine Noise
sounds like a feedback of some sort. Or a short.
What do you mean though by having the ins of your interface to your outs? You need your SP outs to your interface and your interface to your computer, that's it.
What do you mean though by having the ins of your interface to your outs? You need your SP outs to your interface and your interface to your computer, that's it.
-
blisnvrwas
- New member
- Posts: 7
- Joined: Wed Jul 15, 2015 11:59 am
- Location: Philadelphia, PA
Re: EXT Source High Pitch Whine Noise
SebP wrote:sounds like a feedback of some sort. Or a short.
What do you mean though by having the ins of your interface to your outs? You need your SP outs to your interface and your interface to your computer, that's it.
Well, I was following this tutorial.
http://blog.dubspot.com/how-to-route-ex ... o-effects/
Re: EXT Source High Pitch Whine Noise
For using the sp as an external fx your interface needs outs that are seperate from the Master outs. You need to take care which out you use. On a lot of interfaces Outs 1&2 are te same as the Master Outs. So if you use them you get that Feedback. Take Outs 3&4 or such... If you dont have seperate Outs you cant use your sp as external fx processor. Also keep the time Delay in mind When you use the sp like this. Depending on your interface you could have noticeable time delayed in the processed Track compared to those that dont run through sp.