404sx vinyl sim?

Moderator: TGN

Post Reply
sp addict
New member
Posts: 9
Joined: Tue Aug 19, 2014 3:36 pm

404sx vinyl sim?

Post by sp addict »

One of the things I didn’t consider when getting the 404 sx was its lack of vinyl sim compression. Instead, the sx has separate compression and vinyl sim, but ITS NOT THE SAME. I was wondering if anybody here has a workaround for the sx in order to achieve that vinyl sim compression sound like the og 404. Any comments or suggestions are much appreciated! :D
User avatar
hseiken
Winner of Silver Medal
Winner of Silver Medal
Posts: 1307
Joined: Mon Aug 01, 2011 2:11 am
Location: San Diego
Contact:

Re: 404sx vinyl sim?

Post by hseiken »

the way vinyl sim works compression works on the older SP's is different and I think even the compressor itself, the standalone effect, is slightly different. You're not going to be able to get that same sound. The closest I think you can get is to turn down the volume of all your samples to about 60% of normal after you did all the levels at full volume, then kick on the compressor with knobs one and 2 all the way to the left.

That's about as close as you'll get, me thinks...maybe you can get closer using that as a starting point.
Image
User avatar
Rabot
Member
Posts: 779
Joined: Fri Apr 03, 2009 9:31 pm
Contact:

Re: 404sx vinyl sim?

Post by Rabot »

hseiken wrote:the way vinyl sim works compression works on the older SP's is different and I think even the compressor itself, the standalone effect, is slightly different. You're not going to be able to get that same sound. The closest I think you can get is to turn down the volume of all your samples to about 60% of normal after you did all the levels at full volume, then kick on the compressor with knobs one and 2 all the way to the left.

That's about as close as you'll get, me thinks...maybe you can get closer using that as a starting point.


or use the limiter mode (FUNC-8 ON) and go MFX12 with CTRL right CTRL 2 LEFT CTRL 3 right
User avatar
noDDy hEAded fREak
Member
Posts: 406
Joined: Sun Dec 23, 2012 5:00 am

Re: 404sx vinyl sim?

Post by noDDy hEAded fREak »

The vinyl sim on the og 404 is more versatile for me.
i.e more easily applies to various beat types.

to try and get that og vinyl sim sound on the sx....
closest id say would be compress(mfx12) every sample individually.

sequence your beat.

then add MFX16 as a master effect.

will lack that ducking/volume fluctuations but will have that lo-fi compressed sound.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
sp addict
New member
Posts: 9
Joined: Tue Aug 19, 2014 3:36 pm

Re: 404sx vinyl sim?

Post by sp addict »

These are some interesting techniques! I know I'll never be able to replicate the same sound exactly, but I'd definitely like to try and get a close as possible.
User avatar
medearis
Member
Posts: 361
Joined: Sat Jun 21, 2014 1:17 am

Re: 404sx vinyl sim?

Post by medearis »

I actually dig the MFX12 comp on the SX... the paper-ripping sound that is introduced when pumped... lolz
 (╯°□°)╯ [ニニニ] LOG TRAP
blavatsky
Member
Posts: 708
Joined: Fri Jan 28, 2011 8:35 pm

Re: 404sx vinyl sim?

Post by blavatsky »

similar to what others are saying, I think...

1. leave limiter OFF, turn Sustain all the way right, Attack just barely up (since no limiter, gets harsh quick), Level all the way right.

2. For the drums , keep volume high (snare/bass), for the music/hats, turn the level somewhere between 30-70, depending on how much pump you want (lower volume = more pump)

I miss Vinyl comp on the SP505, but I think the 404sx/555 do a good job with some tweaks

The "lofi comp" on the 555 is very versatile btw, shame its not on the 404....
Post Reply