mpc sp404 program

Nym · Post by **Nym** » Mon Sep 04, 2006 4:54 am

http://www.excommence.com/mpc404.pgm

Post by **Chulukinat** » Mon Sep 04, 2006 12:31 pm

thank you nym it finally worked! turned out i had to unsync the 404 to the midiclock in order for it to work!

selfish · Post by **selfish** » Mon Sep 04, 2006 3:15 pm

Thx again nym.

Housemaster · Post by **Housemaster** » Wed Sep 06, 2006 8:06 pm

What is this?

Nym · Post by **Nym** » Fri Sep 08, 2006 6:18 pm

it controls the sp404 from the mpc. nice for setting a bunch of samples on the sp404 pads and making a pattern on the mpc, then applying an effect to the whole bank of the sp404 and tweaking them live.

rabulisten · Post by **rabulisten** » Sun Sep 10, 2006 3:48 pm

i cant get this to work i unsynced 404 as mentioned .nothing happens. sync out is on on the mpc. aint i supposed to be able to trigger 404 samples now?

Post by **Chulukinat** » Tue Sep 12, 2006 12:17 pm

did you make sure to load the 404 program file in the mpc?

rabulisten · Post by **rabulisten** » Thu Sep 14, 2006 7:22 pm

chulukinat wrote:did you make sure to load the 404 program file in the mpc?

heheh ,good one. yes i have solved the problem i needed to use "midi" instead of "drum" and enable midi channel 3a for some reason. well it works now. cheers

Post by **Chulukinat** » Fri Sep 15, 2006 12:00 am

midi channel 3a? do you have a 2500 or something?
its on 3a because you got your sp-404 connected to midiport 3 and A on your mpc

(look on the back)

by the way i never understood this drum/midi option i always use drum mode and i can record midi with it as well...