Teebs Kicks & Low End
Moderator: TGN
Teebs Kicks & Low End
tryin to figure out how teebs gets his kicks to sound so bassy but so clean and undistorted, does he just use the subsonic effect on the kick transients maybe? idk but they sound awesome and i would like to achieve something like that, like on the song double fifths i would love to have an idea how to get a clean ass kick like that
Re: Teebs Kicks & Low End
I'm curious about the bass guitar-esque sounds as well
Re: Teebs Kicks & Low End
not tryin to bite his style by any means i just would like to be pointed in the right direction with how to get it to sound something like that
- springwater
- Member
- Posts: 1343
- Joined: Sat Aug 08, 2009 10:28 pm
- Location: Oakland, CA
- Contact:
Re: Teebs Kicks & Low End
your going in the right direction if you add a subsonic bass sound to a kick drum. Try it out see what happens. Find a way to eliminate every frequency higher than like 150 hz. Maybe even higher than 80 hz. Just keep isolating the highs and mids out, then filter the kick and it might be low enough. layer 2 dumping ass kick drums, cut off the tails and resample a bunch. Try and sample on of his kicks and use it as a reference.
-
tape smoke
- Funniest Member of the Year '09
- Posts: 1877
- Joined: Tue Jul 10, 2007 4:06 am
Re: Teebs Kicks & Low End
! beware the subsonic, it can be dangerous to speakers, it is a good idea to cut the lows a bit, and test on a regular powered system. you dont want to blow shit up.
I/O - EHT - Evangelist.
- springwater
- Member
- Posts: 1343
- Joined: Sat Aug 08, 2009 10:28 pm
- Location: Oakland, CA
- Contact:
Re: Teebs Kicks & Low End
oh yeah, that too. Keep the volume on low.
Re: Teebs Kicks & Low End
thanks for the tips, yeah I am pretty good at not overloading the bass, I did a lot of modification to songs because of my interest in car audio and i had a 18 inch woofer tuned to 24hz to test it in lol but yeah as long as i dont square the waves and have a clipped nasty bass signal it should be ok, just trying to get that nice touch i hear from teebs it just sounds beautiful
- sleepy eyes
- Member
- Posts: 321
- Joined: Thu May 12, 2011 4:14 am
- Location: southern ca
- Contact:
Re: Teebs Kicks & Low End
springwater got it, i would use isolater to take out some mids, resample, subsonic (very low, short bass tone), resample, filter (if needed), and eq (if needed)
Last edited by sleepy eyes on Wed Aug 15, 2012 8:23 pm, edited 1 time in total.
- juniormungus
- Member
- Posts: 137
- Joined: Wed Dec 07, 2011 7:02 am
Re: Teebs Kicks & Low End
springwater wrote:your going in the right direction if you add a subsonic bass sound to a kick drum. Try it out see what happens. Find a way to eliminate every frequency higher than like 150 hz. Maybe even higher than 80 hz. Just keep isolating the highs and mids out, then filter the kick and it might be low enough. layer 2 dumping ass kick drums, cut off the tails and resample a bunch. Try and sample on of his kicks and use it as a reference.
no idea what teebs kick sounds like
but this is good advice
and if you have no luck with the subsonic like me
do this with an 808 kick with short decay (or to your liking)
tune it, and throw it under the kick
imo it sounds better than the subsonic effect
Re: Teebs Kicks & Low End
he is using FL studio for a lot of the production plus guitars and gear he borrows from friends... live its strictly 404
-
aaronmaxwell
- Member
- Posts: 110
- Joined: Thu Jun 30, 2011 11:01 pm
Re: Teebs Kicks & Low End
he edits the kicks in fl studio. he might use some 404 fx but yeah what the guy above me said, pretty sure he uses the 404 just for live performances.