getting rid of high pitched ring with vhs samples
Moderator: TGN
- sleepy eyes
- Member
- Posts: 321
- Joined: Thu May 12, 2011 4:14 am
- Location: southern ca
- Contact:
getting rid of high pitched ring with vhs samples
yo
so ive been wondering if the sp fam had any techniques of getting that high pitched buzz out of vhs recordings..
i have the audio out from the tv > mixer > sp but the ring is still noticeably loud in the final mix..
maybe filter, or isolater, possibly cross cancellor, i havent tried anything yet, just seein if yall could help me out
peace
so ive been wondering if the sp fam had any techniques of getting that high pitched buzz out of vhs recordings..
i have the audio out from the tv > mixer > sp but the ring is still noticeably loud in the final mix..
maybe filter, or isolater, possibly cross cancellor, i havent tried anything yet, just seein if yall could help me out
peace
-
mixgranted
- New member
- Posts: 3
- Joined: Wed Feb 08, 2012 1:36 am
Re: getting rid of high pitched ring with vhs samples
It may be a "ground loop" issue.
Plug the power cords from the tv, vcr, mixer, and any other equipment into a good power strip. If everything is plugged into the same power strip then you may be able to eliminate the "ground loop"
Just a thought.
Plug the power cords from the tv, vcr, mixer, and any other equipment into a good power strip. If everything is plugged into the same power strip then you may be able to eliminate the "ground loop"
Just a thought.
Re: getting rid of high pitched ring with vhs samples
Rip off the ground prong
http://P00K.bandcamp.com/
soundcloud.com/P00K
soundcloud.com/P00K
-
tape smoke
- Funniest Member of the Year '09
- Posts: 1877
- Joined: Tue Jul 10, 2007 4:06 am
Re: getting rid of high pitched ring with vhs samples
try the lofi button, not the fx lofi, this sometimes cuts hum and hiss a bit,
or try the sp pitch, just a little bit might blur it a bit. real pitching would might work too,
you could also check out the spectrum and chop out entire ranges, it would be the best way, probably if it isn't a ground issue.
or try the sp pitch, just a little bit might blur it a bit. real pitching would might work too,
you could also check out the spectrum and chop out entire ranges, it would be the best way, probably if it isn't a ground issue.
I/O - EHT - Evangelist.
Re: getting rid of high pitched ring with vhs samples
If it's not a ground loop issue then maybe it's something to do with the TV. Have you tried the audio out on the VCR instead? More direct that way.
- sleepy eyes
- Member
- Posts: 321
- Joined: Thu May 12, 2011 4:14 am
- Location: southern ca
- Contact:
Re: getting rid of high pitched ring with vhs samples
cool thanks guys ill try this shit out, I tried the audio out from the vcr but had no luck, the lofi button seems like it would work well tho
- sleepy eyes
- Member
- Posts: 321
- Joined: Thu May 12, 2011 4:14 am
- Location: southern ca
- Contact:
Re: getting rid of high pitched ring with vhs samples
culp rip it off the tv or the vcr?
- yo-yo crunch
- Member
- Posts: 577
- Joined: Wed May 09, 2007 12:49 pm
Re: getting rid of high pitched ring with vhs samples
sampling in mono might help a little bit too
Re: getting rid of high pitched ring with vhs samples
try sampling THROUGH the SP to something else with the lo fi button lit, then sample that with the SP.
- sleepy eyes
- Member
- Posts: 321
- Joined: Thu May 12, 2011 4:14 am
- Location: southern ca
- Contact:
Re: getting rid of high pitched ring with vhs samples
isolator, kill some highs
or
EQ , kill some highs
or
Vinyl sim, drop the the freq range
or
EQ , kill some highs
or
Vinyl sim, drop the the freq range
-
susan balmar
- Member
- Posts: 115
- Joined: Tue Jul 17, 2012 10:36 pm
Re: getting rid of high pitched ring with vhs samples
put it in a under an iguana lamp for 3 days.
- sleepy eyes
- Member
- Posts: 321
- Joined: Thu May 12, 2011 4:14 am
- Location: southern ca
- Contact:
Re: getting rid of high pitched ring with vhs samples
lol ill get right on that susie
i really think ripping that shit off will work but i gotta find out which one
edit: i tried most of your guys tips but we still ringin ova here, im trying to get it to work the most convenient for my workflow so sampling threw shit is kinda a tedious no go for me, although it would prolly work really well if i cut the highs with 404sx vinyl sim and lofi into my og
i really think ripping that shit off will work but i gotta find out which one
edit: i tried most of your guys tips but we still ringin ova here, im trying to get it to work the most convenient for my workflow so sampling threw shit is kinda a tedious no go for me, although it would prolly work really well if i cut the highs with 404sx vinyl sim and lofi into my og
Re: getting rid of high pitched ring with vhs samples
You could try a different VCR. Take the SP round a friend's or whatever and see if you get the same thing. 

