Loading samples from Ableton Live
Posted: Tue Mar 10, 2009 5:35 pm
you probably know most producers don't use just one snare sound in a tune and layering samples with the loop capture can get hard if you are loading a lot of samples.
heres what i do:
1.open a new file in ableton
2.make 4-8 audio tracks
3.load a different sample of the same type (or not) into the first scene of each track
4.go the track delay and set each track off +/- 10-15 milliseconds (if you want that natural feel)
5.make sure your sampling setting on the sp-555 is set to auto
6.select your pad and arm the sampling
7.trigger the scene
you now have layered multiple samples in 15 seconds
heres what i do:
1.open a new file in ableton
2.make 4-8 audio tracks
3.load a different sample of the same type (or not) into the first scene of each track
4.go the track delay and set each track off +/- 10-15 milliseconds (if you want that natural feel)
5.make sure your sampling setting on the sp-555 is set to auto
6.select your pad and arm the sampling
7.trigger the scene
you now have layered multiple samples in 15 seconds