Couple questions
Posted: Tue Apr 22, 2008 9:14 am
Hey guys. Considering purchasing an SP-555, but I've got a few questions first.
When you're triggering samples from the SP, I know there's one-shot mode, and the mode where you have to hold down the pad to play the whole sample. I was wondering if you're using one-shot mode.... let's say you hit the pad once to trigger a sample, let the sample play half way through, then hit the pad again. Will the sample cut off, and start from the beginning again? Or will the first trigger hit make the sample play all the way through even if its re-triggered?
Could someone explain to me the concept of back-up pads/settings? I read something about this in the manual. Is it basically a way to compress/backup drum samples and store them in a memory card without taking too much space? From my understanding, you'd be able to load up a certain backup, but you can't use samples across different backups. Like for example, you may have Kick A and Kick B in backup one, and Kick C and Kick D in backup two. You wouldn't be able to create a beat using Kick A and C or B and D right?
Hows its performance as an audio interface? I'm not sure if the SP-555 is USB 1.1 or 2.0. Could someone clarify this for me? I'm planning on using the SP with my MacBook. Using the RCA outs into a pair of active monitors. Lets say I wanted to sample some vinyl. Do I need a mixer before going into the SP or does the SP bring the level up to the RIAA standard?
And finally.... this request is a bit of a stretch... But could anyone with an SP-555 post a video of chopping a sample and putting a rough track together? Or even SP-404 would work. The YouTube videos I've found don't really go into detail about the chopping part, which I'd like to know more about.
Thanks!
rillah
When you're triggering samples from the SP, I know there's one-shot mode, and the mode where you have to hold down the pad to play the whole sample. I was wondering if you're using one-shot mode.... let's say you hit the pad once to trigger a sample, let the sample play half way through, then hit the pad again. Will the sample cut off, and start from the beginning again? Or will the first trigger hit make the sample play all the way through even if its re-triggered?
Could someone explain to me the concept of back-up pads/settings? I read something about this in the manual. Is it basically a way to compress/backup drum samples and store them in a memory card without taking too much space? From my understanding, you'd be able to load up a certain backup, but you can't use samples across different backups. Like for example, you may have Kick A and Kick B in backup one, and Kick C and Kick D in backup two. You wouldn't be able to create a beat using Kick A and C or B and D right?
Hows its performance as an audio interface? I'm not sure if the SP-555 is USB 1.1 or 2.0. Could someone clarify this for me? I'm planning on using the SP with my MacBook. Using the RCA outs into a pair of active monitors. Lets say I wanted to sample some vinyl. Do I need a mixer before going into the SP or does the SP bring the level up to the RIAA standard?
And finally.... this request is a bit of a stretch... But could anyone with an SP-555 post a video of chopping a sample and putting a rough track together? Or even SP-404 would work. The YouTube videos I've found don't really go into detail about the chopping part, which I'd like to know more about.
Thanks!
rillah