Page 4 of 4
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Wed Dec 16, 2015 12:10 am
by KIYANI
Is there a trick with the auto sync? It seems I can't resample or tweak effects or anything while its doing that... Do I just have to bounce it out?
Also it comes up ''tuning'' when I press the autosync, then I press it again and it goes to ''master''. Whats up with the tuning?
And are there some hidden tricks using the SPECIAL button in combination with multiple other buttons?
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Wed Dec 16, 2015 9:53 am
by scopebeats
(As far as i remember - don't really use the Auto sync)
i.e. you have a drumbreak (for example 85bpm) on pad 1 and a sample-Loop (for example 4 bars Long, 90 bpm) on pad 2
you can now go to Auto sync, so it's asking you which way to sync it "Tuning" means pitching / "reample" creates a new timestretched sample.
So you hit Auto Sync (choose which way to Auto sync Tuning/resample) if you want the sample (pad 2) match the bpm of the drums (pad 1) you Press the Pad 1 after MASTER and pad 2 after SLAVE is displayed. press Auto sync again - done. i think you could resample that without a Problem but as i said i never really used the Auto sync.
here's a link to the referring page of the Manual if you're confused when reading my bad english "tutorial" haha
http://www.manualslib.com/manual/200116 ... ml?page=38
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Wed Dec 16, 2015 8:34 pm
by MattCoops
I got the manual and I got to sit down and read it sometime.
There is so much I haven't used or have no idea how to work.
I still can't pin down the Offset function. I wonder the capabilities of this.
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Wed Dec 16, 2015 9:31 pm
by HELLOPILLOW
ellaguru wrote:MattCoops wrote:The SampleTrak forums has been dead for a few years.
It's a ghost town there compared to this board.
I've had ST-224 questions that got answered here.
Wish I seen more posts in the Music section with beats using strictly SampleTrak.
track 1, and 4(controlled by an200) are only st224 (plus samples), the rest, track 3 has st224 drums
https://illtrovatore.bandcamp.com/album/old-vs-school-ep
WOW FUCKIN GREAT TAPE
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Thu Dec 17, 2015 12:38 pm
by ellaguru
HELLOPILLOW wrote:ellaguru wrote:MattCoops wrote:The SampleTrak forums has been dead for a few years.
It's a ghost town there compared to this board.
I've had ST-224 questions that got answered here.
Wish I seen more posts in the Music section with beats using strictly SampleTrak.
track 1, and 4(controlled by an200) are only st224 (plus samples), the rest, track 3 has st224 drums
https://illtrovatore.bandcamp.com/album/old-vs-school-ep
WOW FUCKIN GREAT TAPE
Man Many Thanx!!! it's old but i accept very weel your complimnets!
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Sat Jan 02, 2016 4:15 am
by KIYANI
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Sat Jan 02, 2016 3:55 pm
by Headphones
That track was dope!
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Mon Jan 04, 2016 4:41 pm
by boombapp28
The Zoom SampleTrak is a dope and seriously slept on machine. Props and respect to Formal for putting me down with it back in 2008. I've used it stand alone for the last few years but have been hearing and seeing people's success in regards to external MIDI control which makes me want to use it in that manner.
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Mon Jan 18, 2016 1:33 pm
by scopebeats
@ sampletrak users:
does anyone of you replaced the headphone jack of a sampletrak? Mine makes a lot of noise when my headphone is plugged in and when i move around in front of the sampler with my headphones on. really annoying.
is it an easy fix to replace the headphone Output? do i Need a Special Part? Can anyone help me? my dude got the same Problem with his sampletrak so we would love to swap out the headphone Outputs and be happy 'til infinity.
hope somebody can help me. peace
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Wed Feb 10, 2016 12:08 am
by FiBa
'ssup scope

had a similar Problem with th main outputs. didn't had to change anything though. Have a look into the output and at the metal contacts. Mine were corroded so I took a screwdriver and scratched it off a few times.
Contacts came back to life without noise or audio breakups.
Hope this will work for ya!
Peace and happy chopping =D
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Wed Feb 10, 2016 8:40 am
by scopebeats
FiBa wrote:'ssup scope

had a similar Problem with th main outputs. didn't had to change anything though. Have a look into the output and at the metal contacts. Mine were corroded so I took a screwdriver and scratched it off a few times.
Contacts came back to life without noise or audio breakups.
Hope this will work for ya!
Peace and happy chopping =D
i'll try that this evening. i already tried to rub it with some alcohol and a q-tip but no luck. will pull out the Toolbox this evening

thanks for the advice, happy chopping too! peace
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Sat Jun 25, 2016 8:12 pm
by Cubilas
I have the SP-555 & 606, along with a Yamaha SU200... the SampleTrak is an absolutely great piece of gear! Don't hesitate to pick one up if you find it for a good price. Combined with the leaked editor software, this thing is so powerful. A rare gem!
Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Thu Feb 23, 2017 2:46 pm
by scopebeats
Just wanted to complete this:
i had a annoying Problem with my headphone Output (only hear Music on one side, noise when moving the cable/jack, etc)
I opened up the sampletrak and wanted to desolder the old headphone Output. but when i looked closer at the soldering-points i saw that one of them was cracked a bit - i've put a drop of new solder on the cracked one and it's working like new again

Re: Picking up a Zoom sampletrak tomorrow morning ; )
Posted: Thu Jul 20, 2017 3:15 am
by Headphones
Is there any way to delete some of the internal samples it came with? Some I'd never really use. It would be nice to get some more memory freed up. I printed up the manual for it, but I forgot where I put it. Don't really want to scroll through a PDF file all day on my iPhone.
Let me know if you guys can help.