| SP-FORUMS http://sp-forums.com/ |
|
| V-Link = MIDI http://sp-forums.com/viewtopic.php?f=13&t=8394 |
Page 1 of 1 |
| Author: | sharpmotif [ Fri Aug 20, 2010 2:37 am ] |
| Post subject: | V-Link = MIDI |
Hi guys, I don't remember seeing too many topics covering this particular subject but maybe someone has messed with this stuff already and has more information to share. Anyway, while the SP-555 is not that great as a controller it might have a bit more under the hood than what the manual says. After reading korakios' topic on the 606 forum I installed a MIDI translator and tried to see what came up. Using the V-Link function the D-Beam, the 3 control knobs and the 16 pads send MIDI messages, so that's 20 x 2: Channel A and B send different stuff, channel C didn't seem to do much apparently... wait, I think the D-Beam did, so that's 20 x 2... + 1... + 3 (the control knobs already send CC data when the V-Link is off). So, maybe it's not all that great, but it might be a good workaround for having more controllers to use and stuff. |
|
| Author: | sharpmotif [ Fri Aug 20, 2010 3:09 am ] |
| Post subject: | Re: V-Link = MIDI |
Tried with a softsynth, Clip mode sends program change or something like that (with the pads). |
|
| Author: | sharpmotif [ Tue Apr 17, 2012 10:12 pm ] |
| Post subject: | Re: V-Link = MIDI |
Digging up an old topic, messed with Bome's Midi Translator Classic and this is what came up: [V-Link] MPD Mode: pp 79 00 (On) - F0 41 7F 00 51 12 10 00 00 00 70 F7 (Off) STD Mode: F0 41 7F 00 51 12 10 00 pp 09 qq F7 (On) - F0 41 7F 00 51 12 10 00 pp qq rr F7 (Off) [CLIP A] CTRL1: B3 08 pp (CC #4: Balance, pp) CTRL2: B3 47 pp (CC #4: Timbre, pp) CTRL3: B3 0B pp (CC #4: Expression, pp) D-BEAM: B3 01 pp (CC #4: Modulation, pp) PADS: C3 00 to c3 0F (Program Change #4: 0 to 15) [CLIP B] CTRL1: B9 08 pp (CC #10: Balance, pp) CTRL2: B9 47 pp (CC #10: Timbre, pp) CTRL3: B9 0B pp (CC #10: Expression, pp) D-BEAM: B9 01 pp (CC #10 Modulation, pp) PADS: C9 00 to C9 0F (Program Change #10: 0 to 15) [CLIP C] Pads: 98 23 7F (Note On) to 98 32 7F (Note On) (Note On #9: B1 to D3) [PALETTE A] PADS: B3 00 00 to B3 00 0F (CC #4 Bank Select MSB 0 to 15) *Alternates with B3 00 pp everytime a different PAD is pressed [PALETTE B] PADS: B9 00 00 to B9 00 0F (CC #10 Bank Select MSB 0 to 15) [PALETTE C] PADS: 99 23 7F (Note On) to 99 32 7F (Note On) (Note On #10: B1 to D3) *While I've done it through USB-MIDI it'll work the same through MIDI Out. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|