i know you can fade in and out using the D-Beam. But the filters etc don't work when using roll?
shame
| SP-FORUMS http://sp-forums.com/ |
|
| no effects when using Roll? http://sp-forums.com/viewtopic.php?f=13&t=8183 |
Page 1 of 1 |
| Author: | parker_knoll [ Wed Jul 14, 2010 8:44 pm ] |
| Post subject: | no effects when using Roll? |
i know you can fade in and out using the D-Beam. But the filters etc don't work when using roll? shame
|
|
| Author: | starboard, revolt! [ Thu Jul 15, 2010 1:13 am ] |
| Post subject: | Re: no effects when using Roll? |
All the effects will work on the sample being rolled, you just can't control any of the knobs while you have the roll button pressed. Alternatively, you can use the D-Beam on trigger, as you mentioned, for volume on rolls or the D-Beam filters will work on the roll. Of course, that means you can't use the D-Beam for volume and have filters at the same time. Then again, if it were possible and you can hold the roll button & a sample pad, use the D-beam for volume, and turn the knob for the filter at the same time, you'd have to be pretty talented to pull them moves off! |
|
| Author: | parker_knoll [ Thu Jul 15, 2010 11:15 am ] |
| Post subject: | Re: no effects when using Roll? |
that's useful, thanks. Yes, i was trying to wang the effects knobs while doing the roll. but good solution re. the d-beam filter, I'm going to try that |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|