SP-FORUMS
http://sp-forums.com/

someone please help
http://sp-forums.com/viewtopic.php?f=13&t=1944		 Page 1 of 2
Author:  Hyde [ Mon Apr 14, 2008 4:54 am ]
Post subject:  someone please help
i cannot get the 'Roll' button to work. i dont understand what i am doing wrong. it will not Roll anything. my samps, demo samps, nothing. any ideas?
Author:  Dj Frantic [ Mon Apr 14, 2008 8:10 am ]
Post subject: 
its probably a defective unit. Roll is pretty strait foward. Hold down the roll button while u hold a pad down and it will roll for as long as u hold them down.
Author:  Hyde [ Mon Apr 14, 2008 1:32 pm ]
Post subject: 
:(

yeah - that's what i thought. nothing happens. if i hold the Roll button and then hit a pad - it just stops the pad from playing....

(sigh...) guess i gotta call zzounds >:(
Author:  PHeMoX [ Mon Apr 14, 2008 4:09 pm ]
Post subject: 
Does this happen on all pads you use roll on? Perhaps the actual part of your samples that get rolled is the part where your sample has no sound?

I had this problem with my SP-606 on one pad too and it was simply a matter of editing the sample so it didn't have this long recorded nothing before the actual sound came.

Still... if you didn't even hear a humming sound or some clicks or whatever I fear you might have a defect unit indeed.
Author:  Dj Frantic [ Mon Apr 14, 2008 4:12 pm ]
Post subject: 
PHeMoX wrote:
Does this happen on all pads you use roll on? Perhaps the actual part of your samples that get rolled is the part where your sample has no sound?

I had this problem with my SP-606 on one pad too and it was simply a matter of editing the sample so it didn't have this long recorded nothing before the actual sound came.

Still... if you didn't even hear a humming sound or some clicks or whatever I fear you might have a defect unit indeed.


Good thinking. Thats possible.
Author:  Hyde [ Wed Apr 16, 2008 12:58 am ]
Post subject: 
it happens on all pads. the unit is defective. i thought it was me at first and that maybe i was doing something wrong but you guys are right - it's a pretty cut and dry kind of thing. got a new on one the way. thanks for the fast replies :)
Author:  inhouseprducer [ Wed Apr 16, 2008 1:46 am ]
Post subject: 
that sucks.....how long do you have to wait? i hope not long!!
Author:  Hyde [ Fri Apr 18, 2008 2:29 am ]
Post subject: 
ok guys. got the replacement unit. still cant get the 'Roll' button to do anything. what are the chances of getting 2 defective brand new units? the answer is - not likely.

so - what am i doing wrong? using the pre-loaded samples (Bank A) i cannot get it to work. using a recorded sample that is just some weird synth noises and no silence in the beginning doesn't work.

here is what i am doing (using pre-loaded sample Bank A):

1) press Roll and then hit any pad (1-16). this makes the Roll button light but i dont get any sound. nothing happens at all.

2) play preset samples 11-16 and in the middle of the sample press the Roll button - nothing happens. the sample keeps on playing like normal.

3) if i hit Roll and then Hold - the Roll button stays lit. if i hit any lit pad (1-16 preset Bank A) then none of the pads play.

so... i must be doing something wrong. can someone up a video of them using it or a detailed explanation as to how it is supposed to work? i thought - well maybe it wont work on the pre-loaded samples on Bank A. but even when i record my own stuff into the sampler - the Roll button seems to have no effect. the only rolling i can do is with the MFX DJFX Looper button :(

i can't believe i am this obtuse. please help.
Author:  jbl [ Fri Apr 18, 2008 5:24 am ]
Post subject: 
press and hold roll then hit the pad. that might do it. i got it to work on a floor model the other day but wasn't as intuitive as i had expected.
Author:  Hyde [ Fri Apr 18, 2008 7:07 am ]
Post subject: 
^ doesn't work. does a tempo or something have to be running?

i thought it was just basically a retrigger button.
Author:  PHeMoX [ Fri Apr 18, 2008 1:22 pm ]
Post subject: 
It is. I'm pretty confident your unit is broken. Perhaps they accidentally send you the 'old' one you send in for repair?

It should really work quite easily, especially right out the box when no settings have been changed (I mean roll speeds / intervals ).

Chances are slim, but I think it's still broken...

By the way;

Quote:
3) if i hit Roll and then Hold - the Roll button stays lit. if i hit any lit pad (1-16 preset Bank A) then none of the pads play.


That really should have worked.... Normally you press and hold the roll button (without pressing the [ hold ] button, but just keeping your finger on the [ roll ] button ) and then press a pad you want to roll. Using [ hold ] will make sure that all pads roll ... if none of it works with the default Bank A then it's definitely still broken.. :(
Author:  Hyde [ Fri Apr 18, 2008 8:19 pm ]
Post subject: 
i just got off the phone with roland and yep - i got a second faulty unit.

this blows. they dont know if it was a bad production run or what. the third one is on its way from zzounds... ugh.
Author:  Michael.Warrick [ Sun Apr 20, 2008 1:42 am ]
Post subject: 
Hyde wrote:
i just got off the phone with roland and yep - i got a second faulty unit.

this blows. they dont know if it was a bad production run or what. the third one is on its way from zzounds... ugh.


hopefully it doesn't take too long to arrive.

Be the time my laptop will be back to me it'll have been 5-6-7 weeks... ridiculous, i lost all faith in dell... should have just bought a mac.
Author:  Euclid Ov Oåklånd [ Sun Apr 20, 2008 5:27 pm ]
Post subject: 
Multiple faulty 555's from the factory, that's crappy. That's why I only buy the tried and true these days.
Author:  Dj Frantic [ Sun Apr 20, 2008 9:59 pm ]
Post subject: 
Thank the Lord mine works fine. I think u just wasted some lottery winning type luck on faulty SPs yo :)
Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/