It is currently Sat Nov 27, 2021 12:02 pm




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Would this be a possible card reader alternative?
PostPosted: Wed May 27, 2020 8:06 pm 
New member

Joined: Wed May 27, 2020 7:42 pm
Posts: 3
I tried so many card readers that I lost count.

Anybody tried the DeLock IDE/SATA bridge vice versa? in conjunction with a sata to SD reader?

It looks promising but again not enough information about these chipsets used. Will it support these ATAPI command sets that the SP808 requires. (I assume that is what it requires)

Description
This converter by Delock enables you to convert the interface of your IDE drives into SATA or the interface of SATA drives into IDE 40 pin.

Specification
• Connector:
1 x IDE 40 pin female
1 x SATA 7 pin female (yellow - host)
1 x SATA 7 pin female (black - device)
1 x 4 pin power connector female
• SATA 1.5 Gb/s and Ultra ATA 133 specification
• IDE supports PIO mode and UDMA mode
• IDE settings via switch for Master / Slave / Cable Select mode
• Suitable for hard drives or optical drives
• LED indicator for power and access
• OS independent, no driver installation necessary

System requirements
• A free IDE 40 pin or SATA port

Package content

• Converter IDE > SATA / SATA > IDE
• 7 pin SATA cable
• Power cable
• User manual


Offline
 Profile  
Top 
 Post subject: Re: Would this be a possible card reader alternative?
PostPosted: Fri May 29, 2020 11:30 am 
New member

Joined: Wed May 27, 2020 7:42 pm
Posts: 3
Ordered this one, copy/paste the specs from the website

SATA Hard Drive To IDE Converter Or IDE Drive To SATA Host Converter. This is a Bi-Direction converter for serial and parallel ATA translation .
It includes the Serial ATA PHY , Link, Transport and Parallel ATA (application layer) controller.
The serial ATA physical , link and transport layers are compliant to serial ATA I/II.
This converter supports a 3GHz Data Rate.
With LED indicated power
Easy installation & no driver needed
Serial ATA 1.0/2.0 Specification Compliant
Automatic Serial ATA 1.5 Gbps Speed Negotiation
ATA /ATAPI PIO mode 0 to 4
ATA / ATAPI Ultra DMA Of Transfer Rate 16.7 , 25, 33, 48, 66, 100, 133 , 150, 300MB/s.
ATA /ATAPI LBA48 addressing node associated with 2-byte sector count
Support Serial ATA Hot-plug
Ultra low power consumption
Work for both AC and DC couple between the transmitter and the receiver
Provide specified OOB signal detection and transmission
Support spread spectrum clocking to reduce EMI
Support Partial / Slumber Power Management
Provide adjustable TX signal amplitude and pre-emphasis level
Slave Support
Support for Windows 98/SE/ME/2000/XP/Vista


Offline
 Profile  
Top 
 Post subject: Re: Would this be a possible card reader alternative?
PostPosted: Tue Jul 28, 2020 7:46 pm 
New member

Joined: Tue Jul 28, 2020 7:44 pm
Posts: 1
Did that drive work for you?


Offline
 Profile  
Top 
 Post subject: Re: Would this be a possible card reader alternative?
PostPosted: Wed Oct 20, 2021 3:58 pm 
New member

Joined: Wed May 27, 2020 7:42 pm
Posts: 3
Bit late reply. No. did not work at all.


Offline
 Profile  
Top 
 Post subject: Re: Would this be a possible card reader alternative?
PostPosted: Wed Oct 20, 2021 4:24 pm 
Member
User avatar

Joined: Tue Feb 15, 2011 11:42 pm
Posts: 960
Location: Des Moines, WA
Sell the sucker and just get a SP404 mk2. Soo much more polyphony as far as pads to use. The only ace up the SP808’s sleeve is the fx and 4 track recorder.

_________________
Livin my life in da underground


Online
 Profile  
Top 
 Post subject: Re: Would this be a possible card reader alternative?
PostPosted: Thu Nov 04, 2021 2:52 am 
Member

Joined: Tue Nov 26, 2019 2:47 am
Posts: 12
Headphones wrote:
Sell the sucker and just get a SP404 mk2. Soo much more polyphony as far as pads to use. The only ace up the SP808’s sleeve is the fx and 4 track recorder.

The SP-808 is still a keeper and you lose far more than you think.

_________________
Members of the Family: (1) SP-808 (1) A-6 (3) SP-202 (1) SP-404
Sold: (2) SP-303 (2) SP-202 (1) SP-505


Offline
 Profile  
Top 
 Post subject: Re: Would this be a possible card reader alternative?
PostPosted: Thu Nov 04, 2021 7:53 am 
Member
User avatar

Joined: Tue Feb 15, 2011 11:42 pm
Posts: 960
Location: Des Moines, WA
They may make a great team though. But I’d only consider a SP808 if I had a 404mk2.

_________________
Livin my life in da underground


Online
 Profile  
Top 
 Post subject: Re: Would this be a possible card reader alternative?
PostPosted: Fri Nov 05, 2021 9:18 am 
Member
User avatar

Joined: Fri Dec 15, 2017 12:55 pm
Posts: 392
Location: Out the back.Im digging up the yard and spying on the devil
TurnDaKnob wrote:
The SP-808 is still a keeper and you lose far more than you think.


+1 ..if you know..you know.

Headphones wrote:
Sell the sucker and just get a SP404 mk2. Soo much more polyphony as far as pads to use. The only ace up the SP808’s sleeve is the fx and 4 track recorder.


There's a lot of features on the SP 808 that unless you own one and use it regularly you'd not necessarily know about, these machines have way more capabilities than just the FX and multi track .

The sample editing and chopping is super precise and works incrementally, Resampling is dope AF...it also has Vari Pitch control,built in synths,Mic,Line and Aux inputs, proper Midi ins and outs,digital expansion options with the OP 1 installed..plus the overall sound of the SP 808 also blows the 404 out of the park when it comes down to sonics too,it's a much more powerful sampler so @Turn Da Knob is absolutely correct when they say you'd lose far more than you think .

While we're on the subject of the 808s FX, i'll also tell you about a secret trick I've discovered, @Headphones.. :wink:

There's a couple of algorithms on the 808 that when you combine them you get an amazing Vinyl Sim style FX simulator...it's very ,very cool , I've been tweaking and messing with this for a little while now.. the A/B comparisons between the 808 & 404 O.G. are really interesting, it's actually getting to the point where I think the effect sounds as good if not better than the 404's Vinyl Sim which is really saying something..I showed it to a well known member here on SP Forums who was pretty impressed with it... I'm not gonna say how I acheived it..that's for others to have SP related kinky fun and games working out..:)....but the FX patches are right there on the 808 if you know where..it sounds like pure fucking filth hehe..it was definitely a big eye opener for me personally ,I've owned 3 of these samplers since their original release and thought I knew these things inside out !

_________________
https://danswift.bandcamp.com/track/her ... -album-mix

https://soundcloud.com/user-58305257


Offline
 Profile  
Top 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 



Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: