***SP-303 System Update Procedure***

You can update your SP-303's system via SmartMedia.

What you need:

1.  SP-303
2.  SmartMedia Card
3.  SmartMedia Card reader for your computer.

**Note:  Updating the system software of your SP-303 will erase all internal samples.  Be sure to back up your data.

Update Procedure:

1.  Copy the file "sp303.prg" to a SmartMedia card that has been formatted by the SP-303.
2.  With power off, insert SmartMedia card in the SP-303.
3.  Power on the SP-303 while holding [FILTER+DRIVE], [PITCH] and [DELAY].
4.  Press [REC] when it begins flashing.
5.  When "END" and Checksum are displayed alternatly, power off the unit.

(c)2001 Roland Corporation U.S.