SP-FORUMS http://sp-forums.com/ |
|
sp555 pads trouble http://sp-forums.com/viewtopic.php?f=13&t=23128 |
Page 1 of 1 |
Author: | wuts_on [ Sun Jan 10, 2016 3:43 pm ] |
Post subject: | sp555 pads trouble |
Hi! The next time I turned my sp555 on , button - fixed velocity didnt work, but if you press the roll - both light up! And then if i click on 1 - no reaction. press 2 - lit and first and second pad, and the same problem have next pads 3-4, 5-6, 7-8 and up to 16. Now about Effect knobs...the only ctrl2 works and, i dont know why - signal on display show me strange things...It shows the values of all three knobs at once! U got some versions what happened? Help plz. |
Author: | KIYANI [ Sat Jan 30, 2016 6:39 am ] |
Post subject: | Re: sp555 pads trouble |
Sounds like maybe water damage? |
Author: | wuts_on [ Sat Jan 30, 2016 3:42 pm ] |
Post subject: | Re: sp555 pads trouble |
KIYANI wrote: Sounds like maybe water damage? No. Device stay on the table all the time. No water or drinks on the workplace... |
Author: | wuts_on [ Thu Mar 17, 2016 11:15 pm ] |
Post subject: | Re: sp555 pads trouble |
wuts_on wrote: Hi! The next time I turned my sp555 on , button - fixed velocity didnt work, but if you press the roll - both light up! And then if i click on 1 - no reaction. press 2 - lit and first and second pad, and the same problem have next pads 3-4, 5-6, 7-8 and up to 16. Now about Effect knobs...the only ctrl2 works and, i dont know why - signal on display show me strange things...It shows the values of all three knobs at once! U got some versions what happened? Help plz. Maybe someday you may need this information. I found out the reason. It was multiplexor crash. (chip is responsible for the signal distribution function) Replacement was made. All good! |
Author: | mr.thraz [ Sat Mar 19, 2016 8:15 am ] |
Post subject: | Re: sp555 pads trouble |
how much was the fix? |
Author: | LO- [ Sat Apr 23, 2016 4:11 am ] |
Post subject: | Re: sp555 pads trouble |
*at a hipster party vaping.* 'yea then my multi plexor chip crashed, and they had to replace it' |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |